National and International Presentations

  1. "Corrosion Fatigue Crack Growth Behavior in an HSLA Steel," International Symposium on Microstructure and Properties of HSLA Steels, TMS, Pittsburgh, PA, 1988.
  2. "Reorientation of Crystallites on a Plate by Twinning," Electron Microscopy Society of Ohio River Valley, Annual Conference 1991.
  3. "Microstructure and Energy of (110)/(110) Ag/Ni Interphase Boundaries," Materials Research Society Annual Meeting, Boston, MA 1992.
  4. "A Solid Metal-Bearing Precursor Route to PTCR Titanates," American Ceramic Soc. Annual Conference & Exhibition, Cincinnati, OH 1995.
  5. "Fabrication of Barium Aluminosilicates by SMP method," Cocoa Beach Conference", Cocoa Beach, FA 1995.
  6. "Transient Liquid Phase Sintering of Celsian-Silicon Nitride Composites Produced by the Oxidation of Alkaline Earth Metal-Bearing Precursors," American Ceramic Soc. Annual Conference & Exhibition Cincinnati, OH 1996.
  7. “On the Mechanisms of Fatigue in Silicon MEMS Structures,” 2001 ASME International Mechanical Engineering Congress & Exposition, Nov. 11-16, 2001, New York, NY.
  8. “Mechanism-Based Models for the Prediction of Fatigue in Polysilicon MEMS Structures,” 2001 ASME International Mechanical Engineering Congress & Exposition, Nov. 11-16, NY, NY.
  9. “Microstructure and Mechanical Properties of 6101 Aluminum Foams,” 2001 ASME International Mechanical Engineering Congress & Exposition, Nov. 2001, New York, NY.
  10. “Mechanical Properties of LIGA Nickel Structures,” 2001 ASME International Mechanical Engineering Congress & Exposition, Nov. 11-16, 2001, New York, NY.
  11. “Mechanisms of Fatigue in Polysilicon MEMS Structures,” 2001 MRS Fall Meetings, Symp. B: Materials Science of Microelectromechanical Systems (MEMS) Devices IV, Boston, MA.
  12. “Plasticity Length Scale and Dislocation Substructures in LIGA Nickel MEMS Structures,” 2001 MRS Fall Meetings, Symposium B: Materials Science of Microelectromechanical Systems (MEMS) Devices IV, Boston, MA.
  13. "PTCR Barium and Barium-Lead Titanates made by Solid-Metal-Bearing Precursor Route," Sharif University of Technology (Invited Lecture).
  14. "Oxidation of Solid Alkaline-Earth-Bearing Precursors to Net-Shape Ceramics and Ceramic-Matrix Composites" International Conference on Ceramics (Invited Paper), Isfahan, Iran, 1998
  15. Damage Tolerant Nb-Al-Ti-Base Intermetallics for Intermediate-Temperature Applications, Presented at The TMS Symposium on Refractory Materials, TMS Fall Meeting, Cincinnati, OH, November 1-5, 1999.
  16. “Fatigue of Silicon MEMS Structures,” Presented at the MRS Symposium on Materials Science of Microelectromechanical Systems (MEMS) Devices III, MRS Fall Meeting, Boston, MA, Nov. 27-Dec.1, 2000.
  17. “Surface Topology and Fatigue Crack Nucleation in Si MEMS Structures,” ASTM Symposium on Mechanical Properties of Structural Films, Orlando, FL, Nov. 15-16, 2000.
  18. “Fatigue of Polymer/Metal Composites,” Presented at The 2000 ASME International Mechanical Engineering Congress & Exposition in the Symposium on Protective Coatings, Orlando FL Nov. 5-10, 2000.
  19. “Environmentally Assisted Fatigue of Silicon MEMS Structures,” 2000 ASME International Mechanical Engineering Congress & Exposition in the Symposium on Mechanics and Materials for Better Micro Devices and Packages-VI: MEMS, Orlando FL Nov. 5-10. 2000.
  20. “Microstructure and Mechanical Properties of Metallic Foams,” Presented at the TMS Symposium on Properties of Nanocrystalline Materials: Deformation and Fracture, New Orleans, LA, Feb. 11-15 2001.
  21. “Fatigue of Nanocrystalline Polysilicon MEMS Structures”, Symposium on Properties of Nanocrystalline Materials: Deformation and Fracture, TMS Annual Meeting, New Orleans, LA, Feb. 11-15 2001.
  22. “Microstructure and Mechanical Properties of LIGA Nickel MEMS Structures,” Presented at the TMS Symposium on Materials and Processes for Sub-Micron Technology, TMS Annual Meeting, New Orleans, LA, Feb. 11-15 2001.
  23. “Mechanisms of Fatigue in Polysilicon MEMS Structures” 2001 Fall Meeting of MRS Symposium B, Materials Science of Microelectromechanical Systems (MEMS) Devices IV, Nov. 26-30, 2001, Boston, MA, B2.3.
  24. “Surface Morphology Evolution During Fatigue of Polysilicon MEMS Structures,” MMC2001 conference, Mechanics and Materials, Fatigue of Advanced Materials Symposium A, San Diego, CA, June 27-29, 2001.
  25. “Mechanism-Based Models for the Prediction of Fatigue in Si MEMS Structures,” Materials Prognosis: Integrating Damage-State Awareness and Mechanism-Based Prediction, TMS 132nd Annual Meeting, San Diego, CA, March 2-6 2003.
  26. “On the Measurement of the Plasticity Length-Scale in LIGA Nickel MEMS Structures,” MMC2001 conference, Mechanics and Materials, Fatigue of Advanced Materials Symposium A, San Diego, CA, June 27-29, 2001.
  27. "Effects of Temperature on the Fatigue Crack Growth Behavior of Cast, Lamellar, Gamma-Based Titanium Aluminides,” MMC2001 Conference symposium: Fatigue of Advanced Materials, Session B, San Diego, CA, June 27-29, 2001.
  28. “Durability of Si and Ni MEMS Structures,” IMECE2003-43425, 2003 ASME International Mechanical Engineering Congress, Nov. 15-21, 2003, Washington, D.C.
  29. “On the Fatigue and Fracture of LIGA NI Foils,” IMECE2003-43425, 2003 ASME International Mechanical Engineering Congress, Nov. 15-21, 2003, Washington, D.C.
  30. “Experiments and Modeling of Small Scale Contacts in Cold Welding Fabrication of Organic Light-Emitting Devices,” IMECE2003-43425, 2003 ASME International Mechanical Engineering Congress, Nov. 15-21, 2003, Washington, D.C.
  31. “Functionalized BIOMEMS Cantilevers for Cancer Cell Detection,”, MRS Spring Meeting,  Session N7: Biosensing Devices and Systems II, April 21-15, 2004, San Francisco, CA
  32. “Synthesis of Self-Assembled Nanostructures by Focused Ion Beam Deposition,” IMECE2004-60434, 2004 ASME International Mechanical Engineering Congress, Nov. 15-21, 2004, Anaheim, CA.
  33. “On the Fatigue and Fracture of LIGA Ni MEMS Structures,” IMECE2004-59678, 2004 ASME International Mechanical Engineering Congress, Nov. 15-21, 2004, Anaheim, CA.
  34. “Fatigue and Fracture of Al Foam Struts” 1ME0E2004-60435, 2004 ASME International Mechanical Engineering Congress, Nov. 15-21, 2004, Anaheim, CA.
  35. “Development of Microtesting Systems: I. Tensile Testing of Metallic Microsamples,” ASEE Annual meeting and conference, June 11-15, 2005, Portland, OR,
  36. Instrumentation of RVM1 Robots for Fabrication of Biologically Inspired Materials,” 2006 ASEE Annual Conference and Exposition, Chicago, IL June 19-21 2006.
  37. “Development of an Inter-University Advanced Instrumentation Course for Graduate Students in Engineering Technology,” ASEE Annual meeting and conference, Chicago, IL, June 19-21 2006.
  38. Biologically Inspired Materials For Robotic Construction,” 2006 ASME International Mechanical Engineering Congress and Exhibition, Nov. 5-11 2006, Chicago IL
  39. “Application of Biologically Inspired Materials in Shatter-Proof Structures,” University of Toledo,” Toledo, OH, Feb 2007.
  40. “Synthesis and Characterization of Biomimicked Structural Composites,” ASEE Annual conference and Exhibition, June 2007, Hawaii.
  41. “Fabrication and Characterization of Biomimicked Structures,” ASME International Mechanical Engineering Congress and Exposition, Nov. 11-15, 2007, Seattle, Washington.
  42.  “Dynamic Testing of Biomimicked Structures,” ASME International Mechanical Engineering Congress and Exposition, Oct.31- Nov. 6  2008, Boston, MA.
  43. “Development of an optimized Algae-based Biofuel  production System,” ASME International Mechanical Engineering Congress and Exposition, Nov. 13-19, 2009, Lake Buena Vista, Florida
  44. “Mechanical Properties of Hemp-Reinforced Biomimicked Composites,” ASME International Mechanical Engineering Congress and Exposition,” Nov. 12-18, 2010, Vancouver, British Columbia.
  45. “Algae-Based Biodiesel for Household Applications,” ASME 2011 International Mechanical Engineering Congress & Exposition, Nov. 11-17 2011, Denver, Colorado
  46. “Rapid Prototyping of Biomimicked Structures,” ASME 2011 International Mechanical Engineering Congress & Exposition, Nov. 11-17 2011, Denver, Colorado
  47. “Effect Of Fiber Form And Volume Fraction On Fiber-Reinforced Biomimicked Composites,” ASME International Mechanical Engineering Congress and Exposition, Nov. 9-15 2012, Houston, TX
  48. “Effects of Environmental Variables on Growth of Algae Intended for Household Biofuel Production,” ASME International Mechanical Engineering Congress and Exposition, Nov. 15-21, 2013, San Diego, CA
  49. “Bioinspired Composites for Direct Writing of Tough Structures,” ASME International Mechanical Engineering Congress and Exposition, Nov. 15-21 2013, San Diego, CA
  50. “Combinatorial Biomimicked Structural Materials Research,” ASME International Mechanical Engineering Congress and Exposition, Nov. 14-20 2014, Montreal, Canada
  51. “Instrumentation of a Biofuel Production System for Household Application,” ASME International Mechanical Engineering Congress and Exposition, Nov. 14-20 2014, Montreal, Canada
  52. “Effects of Environmental Factors on the Mechanical Properties of Metallic Foam Struts,” ASME International Mechanical Engineering Congress and Exposition, Nov. 14-20 2014, Montreal, Canada
  53. “On the Development of a 3D Printer for Combinatorial Structural Composite Research,” ASME International Mechanical Engineering Congress and Exposition, Nov. 13-19 2015, Houston TX.
  54. “On the Micromechanical Characterization of Metallic MEMS by a Hybrid Microtester,” ASME International Mechanical Engineering Congress and Exposition, Nov. 13-19 2015, Houston TX.
  55. “Environmental Effects on the Mechanical Properties of Small Structures,” ASME International Mechanical Engineering Congress and Exposition, to be made, Nov. 11-17, 2016, Phoenix AZ
  56.  “Effect of Reinforcement Fiber Length on the Mechanical Behavior of Biomimicked Composites,” ASME International Mechanical Engineering Congress and Exposition, to be made, Nov. 11-17, 2016, Phoenix AZ
  57. “APPLICATION OF BIOMIMICKED COMPOSITES IN 3D PRINTED ARTIFACTS, ASME International Mechanical Engineering Congress and Exposition, Nov. 11-7, 2017, Tampa, FL
  58. “ENVIRONMENTAL EFFECTS ON THE MECHANICAL BEHAVIOR OF COVETIC ALUMINUM MEMS COMPONENTS”, International Mechanical Engineering Congress and Exposition, Nov. 11-7, 2017, Tampa, FL
  59. “Biomimicked Composites” Invited Talk, Northern Kentucky University, Oct. 20th, 2017 Academic Year, Department of Physics, Geology and Engineering Technology, Highland Heights, KY
  60.  “Printed Homes: Additive Manufacturing Reforming Construction Technology”, Invited Talk, University of Cincinnati, Feb. 23rd 2018, Cincinnati, OH
  61. “Mechanical Properties of 3D printed biomimicked Structures” ASME International Mechanical Engineering Congress and Exposition, Nov. 9-15, 2018, Pittsburg, PA
  62. “Mechanical Properties of 3D welded metals” ASME International Mechanical Engineering Congress and Exposition, Nov. 9-15, 2018, Pittsburg, PA
  63. “Mechanical Properties of 3D welded metals” ASME International Mechanical Engineering Congress and Exposition, Nov. 8-14, 2019, Salt Lake City, UT
  64. “Mechanical Properties of 3D welded metals” ASME International Mechanical Engineering Congress and Exposition, Nov. 8-14, 2019, Salt Lake City, UT
  65. “Manufacturing Dream Homes Digit by Digit: Digital Homes” Jun. 2nd 2020, Kentucky Academy of Science, virtual presentation.
  66. “Fatigue Properties of 3D Welded Thin Structures,” ASME International Mechanical Engineering Congress, virtual presentation, Nov. 16-19, 2020,
  67. “On the Fatigue Properties of 3D Steel Structures Welded onto Ceramics,” ASME International Mechanical Engineering Congress, virtual presentation, Nov. 1-5, 2021,
  68. “On the Micromechanical Properties Of Conventional & 3d-Printed Rebar,” ASME International Mechanical Engineering Congress, Columbus, OH, Oct.30-Nov.3. 2022,
  69. “ON THE RELIABILITY OF 3D PRINTED REBAR,” Kentucky Academy of Science Conference, Nov. 11-12, 2022, Morehead, KY

 

Poster Presentations at NKU:

  1. S.M. Allameh, T. Brackman and C. Dale Elifrits, “Assessing the Outcomes of 2007 NKU Engineering Camps,” poster presentation displayed at Presentation Events of Northern Kentucky University 2008, Highland Heights, KY
  2. S. M. Allameh, and P. Cooper, “Robotic Construction of Biologically Inspired Structures,” poster presentation at Fifth Friday Event, 2006, Northern Kentucky University, Highland Heights, KY

72.  S.M. Allameh and R. Miller, “Mechanical Properties of 3D printed Metals”, Presented at the 2019 Annual Meeting of Kentucky Academy of Science, Brea College, Brea KY

 

Student Presentations at NKU

  1. M. Kamal, M. Alhakeem, and S.M. Allameh, “Fabrication and Characterization of Biomimicked Structural Composites,” poster presentation at the Celebration of Students Research and Creativity event, 2007, Northern Kentucky University, Highland Heights, KY 41099
  2. Tom Ogonek, S.M. Allameh and P. Cooper, “Fabrication and Characterization of Composites,” poster presentation at the Celebration of Students Research and Creativity event, 2007, Northern Kentucky University, Highland Heights, KY 41099
  3. Tom Ogonek, S.M. Allameh and P. Cooper, “Dynamic Shear Testing of Composites,” poster presentation at the Celebration of Students Research and Creativity event, Northern Kentucky University, Highland Heights, KY 41099
  4. F. Bregena, M. Kannan, and S.M. Allameh, “Development of an optimized Algae-Based Biofuel  Production System,” poster presentation at the Celebration of Students Research and Creativity event, 2009, Northern Kentucky University, Highland Heights, KY
  5. C. Schutzman, J. Correa, S. Sarowa and P. Blackmore and S.M. Allameh, “Biofuel Extraction System for Household Applications,” poster presentation at the Celebration of Students Research and Creativity event, 2009, Northern Kentucky University, Highland Heights, KY
  6. M. Scott, J. Kirby, M. Mendoza and S.M. Allameh, “Biomimicked Construction,” poster presentation at the Celebration of Students Research and Creativity event, 2013, Northern Kentucky University, Highland Heights, KY
  7. D. Algae, Y. Albdiwi, A. Ben Shahbal, A. Hameye, R. Miller and S.M. Allameh, “Development of a Rapid Prototyping System for Biomimicked Construction,” poster presentation at the Celebration of Students Research and Creativity event, Northern Kentucky University, Highland Heights, KY 41099
  8. A. Najjar, A. Almuwallad, H. Alharbi, S.M. Allameh and M. Kannan, “Biofuel  Extraction System for Household Applications,” poster presentation at the Celebration of Students Research and Creativity event, 2013, Northern Kentucky University, Highland Heights, KY
  9. E. Beckman, C. Schutzman, S.M. Allameh and M. Kannan “Effects of Environmental factors on Mixed Algae Growth,” poster presentation at the Celebration of Students Research and Creativity event, 2013, Northern Kentucky University, Highland Heights, KY
  10. A. Alshammari, A. Shanawaz, H. Al Qahtani, R. Alahmadi, M. Torres, M. Sadat and S.M. Allameh, “Development of an Automated Grass Cutting System,” poster presentation at the Celebration of Students Research and Creativity event, 2014, Northern Kentucky University, Highland Heights, KY
  11. M. Alghamdi, A. Alzahrani, H. Al Qahtani, M. Torres, M. Sadat and S.M. Allameh, “Development of an Automated House Leveling System,” poster presentation at the Celebration of Students Research and Creativity event, 2014, Northern Kentucky University, Highland Heights, KY
  12. J. Williams, H. Khusheim and S.M. Allameh, “Development of a Microtesting System,’ poster presentation at the Celebration of Students Research and Creativity event, 2014, Northern Kentucky University, Highland Heights, KY 41099
  13. M. Lauer, A. Carella, J. Nudalo, and S.M. Allameh, “Functionalization Of A 3d Printer For Combinatorial Materials Research,” poster presentation at the Celebration of Students Research and Creativity event, 2014, Northern Kentucky University, Highland Heights, KY
  14. M. Alanazi, A. Alanezi and S.M. Allameh, “Structural Materials Deposition Systems For Combinatorial Materials Research,” poster presentation at the Celebration of Students Research and Creativity event, 2015, Northern Kentucky University, Highland Heights, KY 41099
  15. J. Wardlow and S.M. Allameh, “Microtensile Characterization of Aluminum Struts,” poster presentation at the Celebration of Students Research and Creativity event, 2015, Northern Kentucky University, Highland Heights, KY
  16. J. Wardlow, T. Haines, and S.M. Allameh, “Environmental Effects on Microstructure’s’ Mechanical Properties,” poster presentation at the Celebration of Students Research and Creativity event, 2016, Northern Kentucky University, Highland Heights, KY
  17. J. Wardlow and S.M. Allameh: Effect of Temperature and Humidity on the Mechanical Properties of MEMS-Scale Components, poster presentation at the Celebration of Students Research and Creativity event, 2018, Northern Kentucky University, Highland Heights, KY
  18. E. Valentine, T. Alsubaii, M. Alduhailan, and S.M. Allameh: Application of Advanced Technology to Promotion of History of Newport, poster presentation at the Celebration of Students Research and Creativity event, 2018, Northern Kentucky University, Highland Heights, KY
  19. B. Leininger and S.M. Allameh: Mechanical Properties of 3D Printed Metals, poster presentation at the Celebration of Students Research and Creativity event, 2018, Northern Kentucky University, Highland Heights, KY
  20.  Fahad Alhajri, S.M. Allameh, Mechanical Properties of 3D printed Biomimicked Composites, poster presentation at the Celebration of Students Research and Creativity event, 2018, Northern Kentucky University, Highland Heights, KY
  21. Abdullah Almuzaini, Roger Miller and Seyed Allameh, Instrumentation of a 3D Printer for Building Construction Components, poster presentation at the Celebration of Students Research and Creativity event, 2019, Northern Kentucky University, Highland Heights, KY
  22. Jose Fonesca Lopez, Darby Kane, and Manar Alzaki and S.M. Allameh “Mechanical Properties of 3D Steel Welded on Concrete, poster presentation at the Celebration of Students Research and Creativity event, 2021, Northern Kentucky University, Highland Heights, KY
  23. Jose Fonseca and Alexis Eckart, and S.M. Allameh, “on the Fatigue Properties of Conventional and Printed Rebar” poster presentation at the Celebration of Students Research and Creativity event, April 2022, Northern Kentucky University, Highland Heights, KY